4- VersaNet Config – Network Deployment

Network Deployment

This section introduces several common network set-up solutions, to assist users in deploying their network according to their specific requirements in the local network environment. To ensure efficient running of the system, the operator must have network function knowledge.

4.1 Requirements
4.1.1 Hardware connection

The Versa system default IP is “192.168.0.220”, before you can connect to the network, set the network parameters of each asynchronous card on the Versa software. A direct network cable connection to connect local computer and LED display is recommended.

Fig. 4-1 Hardware Connection for a Versa Configuration Display

Attention:  The local computer must be directly connected to the 100Mpbs network port