LED Display Configuration According to the quantity of scan board, there’re two different modes for LED display configuration: No scan board cascaded mode or cascading scan board mode. 1) No scan board cascaded mode (one PSD100 Asynchronous card only) Switch to “Screen Config” page in Fig. 7-1,...
Start Manually 7.1.2.1 Smart Setting Operating steps: 1) Select “Config Screen “option in the Screen Config window (Fig.7-1), and click ”Next”, enter screen config window. 2) Click “Smart Setting “button in “Scan Board “page and to open the Smart Setting dialog as shown below, Fig. 7-4 Smart Setting dialog 3) Select...
Versa operation instructions 7.1 Starting the LED Display 7.1.1 Start with System Configuration File Using system screen configuration file to configure LED display is very simple and easy. Requirement: The configuration file must match the LED display type. Operating steps: 1) To configure a LED display with the system configuration file,...
6.1 Versa main interface Fig. 6-1 Versa main interface Title: Shows software name and version info; Menu/Toolbar: See the next section for detailed description (Table 6-1); Monitor info: Shows the overall monitoring results. Red point indicates error detected and green indicates no error. Click on the red point to access...
VersaNet software integrates functions of LED display configuration, brightness adjustment, comprehensive working status monitoring, LED lights open/short circuit status check etc. Versa also plays an important role in the pixel level LED display brightness/chromaticity calibration by working with VersaNet to fulfill the operation. With cabinet...
Playback control software（Versa Net）setting 1) Run Versa Net in Control Computer A. Click 【Configuration】→【Software Configuration】in the main interface, as shown below: Fig. 4-24 Software settings Connect IP: IP corresponding to the network card currently used by computer; Connection ports: If using the default value, make sure the port...
Display setting The following text shall will explain the configuration operation steps, and the configuration steps of other display screens which are similar. Run Versa on the local computer, and use network cables to connect to the local computer and asynchronous card, or connect them in one...
Small WAN Solution（server-free） The communication principle is: the LED control card connects to the Versa Manager control platform which is running on the playback control computers actively by domain parameters, to establish communication links; At present, the common ways to access the network includes: network cable access to...
LAN configuration solution All LED displays and the control computer need to located in the same LAN; Hardware Requirements: • Versa asynchronous control card: PSD100 • Switch Software Requirements: • Versa • Versa Manager Fig. 4-9 All LED displays and control computers locate in the same LAN 4.2.1.1 Display setting IF multiple Ethernet connection...
4.1.2 Setting IP Setting Set the IP of the local computer to：192.168.0.100；Run VersaNet on the local computer; 1) Click 【System】→【Search All Site】the Current Connected Versa systems will be searched. An example of the searching results is shown below: Fig. 4-2 Search Versa system 1) Select the Display, and then...